Inventory

Sludge dewatering decanter unit including electric panel. The unit will be delivered with a autom...

Stainless steel screw conveyor, conveyor length; 3 m. Screw conveyor: Ø 230 mm. Total height 2,5 ...

Reconditioned screw conveyor - 1,5 meter long and 180 mm diameter. New bearings, new lipseals, ge...

IRAS Pre-cutting machine for fish offal. The pre-cutted material is fed to a mono pump that pumps...

Tank system for cleaning of proces water. Including electric box and fittings.

15 liter acid proof stainless steel pressure containers with LUWA releif valve and lid with fitti...

Steam boiler for diesel oil / light oil type. Burner capacity (nom/max): 436 kW Heat supply, (m...

100 liter mobile process tank for vacuum and pressure conditions. It has been used in food pilot ...

This diesel forklift has been in operation until 2012. It is complete but the chains and hydrauli...

Stainless steel mobile vessel with 3 wheels. Volume 390 liter. Flat bottom with treaded pipe outl...

Horizontal cylindric process vessel in stainless steel with centershaft with blades for slowly mi...

Stainless steel vessel with lid. Volume 465 liter. Flat bottom outlet via 3” treaded pipe. Mounte...

3 x stainless steel vessels with around 430 liter volume each. The 3 vessels have 3 wheels each. ...

2 x stainless steel mobile vessels with around 510 liter volume. Bottom outlet with treaded 3” pi...

Vertical acid proof stainless steel tank on 4 legs with top mounted stirrer. Diameter: 4,2 m, leg...

This APV RANNIE homogenisator – model SLOW – has been used in food industry. It can supply 200 Ba...

Mixer/stirrer in acidproof stainless steel with stainless steel frame - for 1.000 liter IBC tank....

Complete reconditioned AMENDUNI separator, including 7,5 kW motor, manual and set of tools. Total...

2" flexible hose normally in use for connections from pipings to a centrifuge in- and outlets.

Shipping dimensions: L x W x H: 100 cm x 80 cm x 80 cm – weight: 300 kg. ABB motor: 50 Hz, 380 V ...

Fristam FZ centrifugual pump unit mounted on a pump frame in stainless steel. Motor: SEVER, 3 kW...

Max bowl speed 6500 RPM, rated 6000 LPH, 11 KW motor 380/3/50/1455 RPM, water harness, tools, con...

We have many APV centrifugal inducer pumps in stock. Motor size: 7,5 kW, 50 Hz, 380 V. These ind...

15 SAV 2 steam valves available.

Steam valve in acidproof stainless steel, type AISI316L We have 7 units in stock.

Steam valve in acidproof stainless steel, type AISI316L We have 8 pieces of these steam valves w...

Air / Water heater with 240 kW heat capacity at 70/40 deg Celcius. CE approved. Water flow: 7,74...

Pressure releif container. Volumen 52,5 liter.

Incomplete Westfalia separator, type SA 100-33-177. Disc stack+distributor is missing and bowl is...

Motor: 7,5 kW, 380 Volt, 50 Hz Stainless steel bowl with all wetted parts being sanitary stainles...

Completely reconditioned Alfa Laval MMPX303 separation system including system manual in English.

Completely reconditioned Alfa Laval fuel oil separator. Motor: 11 kW, 50 Hz, 380 V. Capacity up t...

Reconditioned WSPX403 separator - configurated as an concentrator - and normally used for removal...

3-phase separator designed for separating sediments and tramp oil from wash water bath.

This complete Alfa Laval WHPX505 separator will be reconditioned at order. We need 12 weeks deli...

This separator module is normally used for clarification of juice, wine, beverage, stick-water, s...

For juice, wine and beverage clarification and polishing. For juice containing up to 6 % solids -...

Capacity up to 2.000 l/hour. Complete separation system for cleaning of mineral oils, including s...

This complete Alfa Laval MMPX303 separation system will be reconditioned at order. We need 12 wee...

Smaller and lighter centrifugal separation module. For removal of water and solid impurities from...

This Alfa Laval IFB303X-73 separator module is designed for the separation of tramp oil from cutt...

This Alfa Laval IFB303X-73 separator module is designed for the separation of tramp oil from cutt...

Reconditioned separator module for removal of tramp oil and particles from wash water in metal ma...

Separation module for cleaning mineral and diesel oils and other oils with low viscosity.

Separation module for cleaning mineral and diesel oils and other oils with low viscosity.

One reconditioned Alfa Laval separator, type FEUX412T-31C including electrical panel, set of tool...

Sludge dewatering decanter unit with HYBAMATOC automatic back drive system. Main motor: 50 Hz, 380V

Complete, build in 20″ container, capacity up to 440 kg/hour dry substance. Plug-and -play unit. ...

Alfa Laval decanter unit, type FPNX418B-31G. Spec. no.: 8820.5000-31. Drum diameter: 190/353 mm. ...

Alfa Laval 2-phase rotating unit, type NX314B-31G. Including bearing houses and feed pipe - no ge...

Bowl for NX314B-31G decanter in good condition. 2 rows for sludge outlet. Bowl with strips.

Conveyor for NX314B-31G decanter. Distance between flights: 100 mm.

Decanter for sludge dewatering. Capacity; approx. 400 kg dry solids/hour, i.ex. 20 m3/hour with 2...

This decanter bowl and parts coming into contact with the products are produced in acidproof stai...

Sludge dewatering from municpal-, industrial- or slop oil treatment plants Westfalia sludge dewat...

Incubator / heating -cooling vessel with temperature control and stirrer for maintaining constant...

We design and deliver complete process lines for producing cod liver oil.

Drive motor: SEW R72 DV132 M4. Power: 7,5 kW, 230/400 V, 50 Hz, rpm: 197. Amp: 27,0/15,5 A Drive...

Belt conveyor with 0,75 kW gear motor. Estimated dimensions: 2 meter belt x 150 mm. This belt con...

Stainless steel ventilator from NIRO spray dryer plant. Motor: 90 kW, 50 Hz, 380V. This unit is i...

Broiler packing machine in stainless steel with wheels - from closed chicken slaughter house. Cap...

Belt conveyor with SAFELINE metal detector. Belt motor: 0,22 kW, 50 Hz, 380 V

Mincer in stainless steel from broiler slaughter hause. Two conveyor system. Tradtional knife sys...

Fish meal dryer

Endress + Hauser Flowtec Variomag DMI 6531, flow measuring module.

Coriolis mass flow measuring system. Compact multi-purpose device. Highly accurate measurement of...

Laboratory reverse osmosis system, model KRAUSE NEW LINE C – for 220 – 240 V, 50 Hz – 130 W – wit...

Laboratory rotation autoclave unit with 80 liter volume.

Heat transfer area: 25,68 sqm Capacity, kW: 1230 Flow, l/hour: 52.776 Volume, L: 32,5 62,5 De...

Heat transfer area: 22,47 sqm Capacity, kW: 500 Flow, l/hour: 10.764 Volume, L: 38,5 38,5 Des...

Process valve in AISI 316 stainless steel.

Automatic controlled 3-way process valve in AISI 316 stainless steel.

3-40 gr. C., 220 V, 310 W, 52 kg, 220 l, b550 x d590 x h1340.

Storage tank in stainless steel in excellent condition.

Rustfri stål reol. Højde=1250 mm, B=1200 mm, D= 550 mm (590 mm). Inkl. 7 ophængsskinner for reole...

workload 200 kg, Machine no. 7835. Weight 59 kg. Year 1997.

This evaporator unit is manufactured in AISI 316 acid proof stainless steel. It has two calendria...

As-new Alfa Laval decanter PONX944B-31G. 110 kW main motor and 22 kW back drive motor. For prot...

Dewatering of biological sludge. Complete system for sludge dewatering – build into a 20″ contai...

This reconditioned separator is in good working condition. Disc distance: 2 mm. Totally 69 discs ...

This reconditioned separator is in good working condition. Disc distance: 2 mm. Totally 69 discs ...

Motor: 22 kW, 50 Hz, 380 V, 3-phase Capacity: Fish oil: 4.000 – 8.000 liter/hour Stick water: 12...

This Alfa Laval ALDEC 402 (NX414B-31G) decanter is refurbished and ready for delivery. Applicati...

Decanter for fish and protein processing. This CBDNX438B-31G decanter centrifuge is in AS-NEW con...

Decanter centrifuge for fish and protein processing. Alfa Laval CentriBone applications. This Al...

One complete Alfa Laval decanter unit, type NX438S-31G – including ancillary CIP equipment and or...

One complete Alfa Laval decanter unit, type NX438S-31G – including ancillary equipment, original ...

EM motor, type KPER 280 S4, 75 kW. 1450 rpm, IP 55, 530 kg.

Aerzen air blower type GM10S

NOVENCO ventilator, type CBF-1000/70/R. See pictures for specifications

This AIREDALE cooling ventilator was used to cool down around 1.000 l/hour hot water.

This complete falling film vacuum evaporator unit is manufactured in AISI 316 acid proof stainles...

Cooling media: R407C - 2 x 7,5 kg. SPECIFICATION: 2000 liter water from +12°C to +1°C Dimension, ...

Design pressure: 24 Bar Test pressure: 32 Bar Volume: 333 liter Design temperature area: - 10 ...

Milk separator for separation of cream from milk. Including foundation frame and valve module. ...

Plate ice plant manufactured by FINSAM including FINSAM ice storage containers with scraper and c...

HETO Ultra freezer, type CL HETOFRIG 3008 E. Temperature range, °C: – 80 to -45 Temperature accur...

Butcher Boy saw machine, model B 16 – in excellent working condition. Serial number 6-14862. 2 H....

Recondition 3-phase Alfa Laval milk separator, type MRPX214-TGV-74 - for separation of cream and ...

Completely reconditioned Alfa Laval separator module, type VNPX407SGT-34 including feed pump, ope...

Insulated NIRO cyclone in acid proof stainless steel from Danish pea protein plant. The plant nev...

NETZSCH mono pump Includes a new stator in nitrile rubber. 5,5 kW LENZE varistor gear motor, n1= ...

Alfa laval pump. Manufact. No. 31460-10444, motor=18,5 kW, H. Pressure: 20 mwc, Q FLow water: 125...

This complete excenter screw pump unit was in operation for feeding bio sludge to a sludge dewate...

NIRO vibrating fluid bed, type FVS 10. This unit has been in operation in Danish pea protein powd...

Displacement: 0,128 liter/rev. Max speed: 1.000 rpm Maximum capacity at max. speed: 7,8 m3/hour. ...

SERA pump, type R409 1-75 E, No. 205244, Q=0-75 l/h, P2 max=10 bar, motor: 0,18 kW, 50 Hz, 380 W

Chiller unit with R22 refrigerant. Weight: 250 kg. Inlet water temperature 12°C Outlet water te...